PAGE INDEX for Section 2 of our FASTENER TECHNICAL DATA CHARTS	Page
STANDARDS CONVERSION	4-11
Standards conversion DIN–EN–ISO/ISO–EN–DIN	4
Standards types, relations	5
Normative changes to screws	6
Normative changes to nuts	7
Normative changes to nuts	8
Normative changes to nuts	9
Normative changes to bolts and pins	10
Normative changes to threads and tapping screws	11
DIMENSIONS FOR FASTENERS	12-91
Dimensions for screws and bolts	12
– Hexagon and hexalobular socket head cap screws	12
– Hexagon head screws/bolts	13
– Studs	14
– Set screws/grub screws	15
– Screw plugs/pipe plugs	16
– Screw plugs/pipe plugs	17
– Lubricating nipples	18
– Theft resistant screws/locking screws	18
– Other screws with metric thread	19
– Other screws with metric thread	20
– Other screws with metric thread	21
– Other screws with metric thread	22
– Other screws with metric thread	23
– Slotted and cross recessed screws with metric thread	24
– Slotted and cross recessed screws with metric thread	25
– Tapping screws, thread rolling screws and thread cutting screws	26
– Tapping screws, thread rolling screws and thread cutting screws	27
– Tapping screws, thread rolling screws and thread cutting screws	28
– Wood screws/chipboard screws	29
– Hooks/special bolts with wood screw thread	30
– Hooks/special bolts with wood screw thread	31
Dimensions for bolts, nuts and accessories for steel constructions	32
– Bolts, nuts and accessories, system HV	32
– Clamping lengths	33
Dimensions for nuts	34
– Hexagon nuts	34
– Hexagon nuts	35
– Hexagon nuts	36
– Locking nuts	37
– Locking nuts	38
– Locking nuts	39
– Nuts for T-slots	40
– Welding nuts	41
– Special forms	41
– Special forms	42
– Special forms	44
– Special forms	45
– Special forms	46
– Special forms	47
– Special forms	48
– Turnbuckles	49
– Square nuts	49
Dimensions for washers and rings	50
– Plain washers-round	50
– Plain washers-round	51
– Square washers/taper washers	52
– Sealing washer-plain	53
– Retaining lock washers and rings	53
– Retaining lock washers and rings	54
– Retaining lock washers and rings	55
– Retaining lock washers and rings	56
– Retaining lock washers and rings	57
– Retaining lock washers and rings	58
– Retaining lock washers and rings	60
– Retaining lock washers and rings	61
– Retaining lock washers and rings	62
– Retaining lock washers and rings	63
– Retaining lock washers and rings	64
– Retaining lock washers and rings	66
– Retaining lock washers and rings	67
– Retaining lock washers and rings	68
– Adjusting rings	69
– Special forms	70
– Special forms	71
– Special forms	72
Dimensions for pins	73
– Parallel pins/taper pins/grooved pins	73
– Parallel pins/taper pins/grooved pins	74
– Spring-type straight pins	75
– Linch pins/spring cottes/split pins	76
– Linch pins/spring cottes/split pins	77
Dimensions for handles	78
– Grips	78
– Tommy screws/tommy nuts	79
– Tommy screws/tommy nuts	80
Dimensions for brackets, clamps and rope fixings	81
– Stirrup bolts	81
– Hose clamps/pipe clamps	81
– Hose clamps/pipe clamps	83
– Rope clips/thimble ropes/shackles	84
Dimensions for rivets	85
Dimensions for other products	86
– Cam segments and washers for diagonal pull tension	86
– Hooks	86
– Axle holders	86
– Parallel keys	86
– Parallel keys	87
Tolerances for screws, nuts and washers	88
Tolerances for screws, nuts and washers	89
Tolerances for screws, nuts and washers	90
Tolerances, ISO deviations	91
PRODUCT INFORMATION	93-103
Disc springs	93
Head shapes, drive features and ends of externally threaded fasteners	94
Cable ties and accessories	96
Cable ties and accessories	97
Lifting eye bolts and lifting eye nuts	98
Special materials	99
Wire thread inserts	100
Wire thread inserts	100
Wire thread inserts	101
Self tapping thread inserts	103
STEELWORK FASTENER AND FIXING SYSTEMS-LINDAPTER	104-106
Steelwork fixings – grider clamps	104
Steelwork fixings – grider clamps	105
Product overview: grider clamps, support fixings, cavity fixings and floor fixings	106
Product overview: grider clamps, support fixings, cavity fixings and floor fixings	107
PLUGS AND ANCHORS	109-139
Plugs and anchors: Selection and assembly aids	109
Plugs and anchors: Selection and assembly aids	110
Plugs and anchors: Selection and assembly aids	111
Plugs and anchors: Selection and assembly aids	112
FISCHER/UPAT: Plugs and anchors	113
– General fixings	113
– General fixings	114
– High performance steel anchors	115
– High performance steel anchors	116
– High performance steel anchors	117
– High performance steel anchors	118
– High performance steel anchors	119
– High performance steel anchors	120
– High performance steel anchors	121
– High performance steel anchors	122
– High performance steel anchors	123
– High performance steel anchors	124
– Chemical fixings	126
– Chemical fixings	127
– Chemical fixings	128
– Chemical fixings	129
– Chemical fixings	130
– Chemical fixings	131
– Cavity fixings	132
– Cavity fixings	133
– Long-shaft anchors/frame fixings/adjustment fixings	134
– Long-shaft anchors/frame fixings/adjustment fixings	135
– Long-shaft anchors/frame fixings/adjustment fixings	136
– Scaffold fixings	137
– Insulation supports	138
– Electrical fixings	138
PLUGS AND ANCHORS	139
MULTI-MONTI screw-in-anchors	139
MULTI-MONTI screw-in-anchors	140
MULTI-MONTI screw-in-anchors	141
Blind rivets and accessories	142
Blind rivets and accessories	143
Blind rivets and accessories	144
Blind rivets and accessories	145
Blind rivets and accessories	146
Blind rivets and accessories	147
Blind rivets and accessories	148
Blind rivets and accessories	149
Blind rivets and accessories	150
Blind rivets and accessories	151
BLIND RIVET SYSTEMS	142-152
Blind rivet nuts and accessories	152
Blind rivet nuts and accessories	153
Blind rivet nuts and accessories	154
Blind rivet nuts and accessories	155
Profile, types, threadability	156
Profile, types, threadability	157
SCREW THREAD	156-158
Tolerances, thread pitches	158
Tolerances, thread pitches	159
Steel screws, bolts, studs and nuts	160
Steel screws, bolts, studs and nuts	161
Fasteners from corrosion-resistant stainless steel	162
Fasteners from corrosion-resistant stainless steel	163
MECHANICAL PROPERTIES	160-164
Fasteners from non-ferrous materials	164
Quality inspection	166
Certificates	166
Acceptance inspection according to ISO 3269	167
INSPECTIONS, ACCEPTANCE TESTINGS, CERTIFICATES	166-168
Test method: Hardness measurement, impact test	168
Test method: Hardness measurement, impact test	169
CORROSION PROTECTION	170-184
General information, corrosion types, contact corrosion	170
Corrosion protection measures	171
Corrosion resistance	172
Electroplated coatings, maximum layer thicknesses	173
Hot dip galvanized coatings	174
ASSEMBLY SCREWED FASTENINGS	175-184
General information, tightening methods, friction coefficients	175
General information, tightening methods, friction coefficients	176
Preloads and tightening torque for fasteners of steel	177
Preloads and tightening torque for fasteners of steel	178
Preloads and tightening torque for screwed fastenings with locking elements	179
Assembly instructions, preloads and tightening torque for high-strength structural bolting (system HV)	180
Assembly instructions, preloads and tightening torque for high-strength structural bolting (system HV)	181
Preloads and tightening torque for fasteners from stainless steel	182
Preloads and tightening torque for fasteners from brass, polyamide or heat resisting steel	183
Assembly instructions for tapping screws	184
Assembly instructions for tapping screws	185
General information, measures	186
Form-fitting locking elements and adhesive coatings	187
LOCKING OF SCREWED FASTENINGS	186-188
Product overview of form-fitting locking elements and adhesive coatings	188
DIRECTIVES AND LEGISLATION	189-192
EC Directive 2000/53/EC on end-of-life vehicles	189
EC Directive 2002/95/EC on electrical and electronic equipment (ROHS directive)	189
ZEK 01-08 PAK	189
HR 4040 – CPSIA	189
EC Directive 76/769/EEC	190
EC Directive EC 2006/122/EC (PFOS)	190
EC Regulation 1907/2006 – Chemicals regulation (REACH)	190
EC Directive 89/106/EEC (Construction products directive)	190
EC Directive 2006/42/EC (Machinery directive)	191
Equipment and Product Safety Act (GPSG)	191
EC Directive 97/23/Ec (Pressure equipment directive)	192
Fastener Quality Act (FQA)	192