KANA Products are available from MARYLAND METRICS

H Class Mill Chains H Class Mill Chains are used for heavy drives and transfer conveyors in saw mills, paper mills, lumber mills etc. This rugged chains are suited to handling moderate loads in abrasive atmospheres where a heavy, ruged chains are required.

Dimensions in Inches and Pounds.

Chain No.	Pitch	Inner Width	Barrel Diameter	Pin Diameter	Link Plate Height	Pin Length		Approx. Weight	Tensile Strength
	P	W	D	d	H	L1	L2	(lbs./ft)	Ave.(lbs.)
H-60	2.308	3/4	3/4	5/16	3/4	2 11/16	2 17/32	2.10	7,000
H-74	2.609	1	7/8	3/8	1	3	2 7/8	3.00	10,000
H-78	2.609	1 1/8	7/8	1/2	1 1/8	3 1/4	3 13/16	4.20	16,000
H-82	3.075	1 1/4	1 7/32	9/16	1 1/4	4	3 7/8	5.50	20,000
H-124	4.000	1 5/8	1 7/16	3/4	1 9/16	5 3/16	4 7/8	8.80	30,000

The above chains are avaiable for the following attachments.

Attachment links A1 attachment	K1 Attachment	K2 Attachment
H1 Attachment	H2 Attachment	F4 Attachment
R1 Attachment	R-R Attachment

---

400 Class Pintle Chains 400 Class Pintle Chains handle numerous elevating, conveying and power transmission service - handling average and moderately heavy loads efficiently at slow and moderate speeds.

Dimensions in Inches and Pounds.

Chain No.	Pitch	Inner Width	Barrel Diameter	Pin Diameter	Link Plate Height	Pin Length		Approx. Weight	Tensile Strength
	P	W	D	d	H	L1	L2	(lbs./ft)	Ave.(lbs.)
442	1.375	5/8	9/16	5/16	3/4	2	1 27/32	1.40	6,000
445	1.630	11/16	5/8	5/16	3/4	2	1 27/32	1.50	6,000
452	1.506	5/8	11/16	3/8	27/32	2 7/32	2 21/32	2.00	7,000
455	1.630	11/16	5/8	3/8	27/32	2 9/32	2 1/8	1.90	7,300
462	1.634	13/16	23/32	7/16	15/16	2 9/16	2 1/2	2.50	9,000
467	2.308	3/4	21/32	5/16	25/32	2 17/32	2 1/8	1.40	6,000
477	2.308	11/16	13/16	7/16	1	2 17/32	2 7/32	2.00	9,600
488	2.609	15/16	7/8	7/16	15/16	2 15/16	2 29/32	2.90	11,000
4103	3.075	1 1/8	1 7/32	3/4	1 1/2	3 7/16	3 5/16	5.70	22,000
4124	4.063	1 1/4	1 23/32	13/16	1 1/2	4 3/4	4 15/32	8.50	33,000

The above chains are avaiable for the following attachments.

Attachment links A1 attachment	A22 Attachment	F2 Attachment
K1 Attachment	K2 Attachment

---

700 Class Pintle Chains The most common applications are in swage and water treatment plants where it is used with F22 attachments and flights to form conveyors for settling thanks etc.

Dimensions in Inches and Pounds.

Chain No.	Pitch	Inner Width	Barrel Diameter	Pin Diameter	Link Plate Height	Pin Length		Approx. Weight	Tensile Strength
	P	W	D	d	H	L1	L2	(lbs./ft)	Ave.(lbs.)
720	6.000	1.12	1 3/8	11/16	1 1/2	3 9/16	3 3/8	4.20	27,000
720S	6.000	1.12	1 7/16	3/4	1 9/16	3 15/16	3 5/8	5.20	37,000
730	6.000	1.12	1 7/16	3/4	1 3/4	3 15/16	3 5/8	6.00	40,000

The above chains are avaiable for the following attachments.

Attachment links A2 attachment	A53 Attachment
F5 Attachment	F22 Attachment

Note: KANA products are not stocked in the USA. Please allow for delivery time from Japan.