Maryland Metrics: Plumbing Fitting Details
| R550-161
Tee - Increasing On Branch |
|
|
| |
| Details |
|
SPECIFICATION
Type
Tee increasing on branch
All fittings comply with the relevant
BS or BSEN standard. For further assistance please call our
technical helpline on (410)358-3130 or (800)638-1830 or email us at
techinfo@mdmetric.com.
When ordering GALVANISED fittings add
suffix 'G' to the figure number.
TAPER THREADS
These fittings have Taper threads
providing the most effective jointing solution:
| > |
Full engagement of the
whole thread length - reliable
strong joints |
| > |
No need for hemp filler -
faster
installation, lower costs |
| > |
High torques can be
applied without risk of damaging the fitting |
| > |
Freedom to break and
re-make joints |
| > |
Professional joint
appearance |
Taper threads make
better joints
Following a
policy of continuous development, Crane Fluid Systems reserves
the right to alter specifications and dimensions shown in the
e-catalog without prior notice.
|
 |
|
| Dimensional
Drawing |
Standard
BSEN 10242 & ISO 49 OR BS143 & BS1256
Connection Type
BS taper to BS21 and ISO7
Material
Malleable Iron
Fitting Type
Tees
|
| Dimensions
and Weights |
| Size |
Weight
(kg/100) |
Pressure |
a
(mm) |
b
(mm) |
| 1 x 1.1/2 |
65.3 |
PN25 |
46 |
42 |
| 1 x 1.1/4 |
34.9 |
PN25 |
42 |
40 |
| 1.1/2 x 2 |
72.6 |
PN25 |
55 |
52 |
| 1.1/4 x 2 |
73.9 |
PN25 |
54 |
48 |
| 1/2 x 3/4 |
19.5 |
PN25 |
31 |
30 |
| 2 x 2.1/2 |
118.4 |
PN25 |
66 |
61 |
| 3/4 x 1 |
22.2 |
PN25 |
36 |
35 |
|
|
How to order: R550-xxx size (example: R550-144 1/2) or R550-xxxG size (example: R550-140G 1/2x1/4) for galvanized fittings where xxx is replaced by the figure number
Please note that not all of the fitting styles, sizes and materials are stocked in North America.
Please allow sufficient lead time for delivery, or check with us for availabilty.
Phones: (800) 638-1830 or (410) 358-3130 are available Monday-Friday
8:30 AM to 5:30 PM Eastern time.
Faxes: (800) 872-9329 or (410) 358-3142
& E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ]
[ To: Maryland Metrics Product
Guide ]
[ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the
property of their respective owners.
copyright 2002 maryland metrics/crane co. -- all rights reserved -- ver [an error occurred while processing this directive] x2c r550xxx.htm
[Enhanced for Netscape/IE]
|
