| Rod Ends Series E - steel on steel |
| Series
EI Rod Ends with female thread made from free-cutting or heat-treated steel, zinc plated, steel on steel Spherical Plain Bearings with lubrication fittings.
|
 |
| Size (D) |
B | M | A | F | L | K | J | O | SW | G | GL | Static load Co kN |
Dynamic load C kN |
Weight gram |
Weight lb. |
| 6 | 6 | 4,4 | 20 | 30 | 40,0 | 13 | 10,0 | 8,0 | 11 | M 6 | 12 | 8,2 | 3,4 | 21 | 0,046305 |
| 8 | 8 | 6,0 | 24 | 36 | 48,0 | 16 | 12,5 | 10,2 | 14 | M 8 | 16 | 12,9 | 5,5 | 38 | 0,08379 |
| 10 | 9 | 7,0 | 28 | 43 | 57,0 | 19 | 15,0 | 13,2 | 17 | M 10 | 20 | 17,6 | 8,1 | 60 | 0,1323 |
| 12 | 10 | 8,0 | 34 | 50 | 67,0 | 22 | 17,5 | 14,9 | 19 | M 12 | 22 | 24,5 | 10,8 | 96 | 0,21168 |
| 15 | 12 | 10,0 | 40 | 61 | 81,0 | 26 | 21,0 | 18,4 | 22 | M 14 | 29 | 36,0 | 17,0 | 180 | 0,3969 |
| 17 | 14 | 11,0 | 46 | 67 | 90,0 | 30 | 24,0 | 20,7 | 27 | M 16 | 33 | 45,0 | 21,2 | 220 | 0,4851 |
| 20 | 16 | 13,0 | 53 | 77 | 103,5 | 35 | 27,5 | 24,2 | 32 | M 20x1,5 | 38 | 60,0 | 30,0 | 350 | 0,77175 |
| 25 | 20 | 17,0 | 64 | 94 | 126,0 | 42 | 33,5 | 29,3 | 36 | M 24x2 | 48 | 83,0 | 48,0 | 640 | 1,4112 |
| 30 | 22 | 19,0 | 73 | 110 | 146,5 | 50 | 40,0 | 34,2 | 41 | M 30x2 | 56 | 110,0 | 62,0 | 930 | 2,05065 |
| 35 | 25 | 21,0 | 82 | 125 | 166,0 | 58 | 47,0 | 39,8 | 50 | M 36x3 | 60 | 146,0 | 80,0 | 1300 | 2,8665 |
| 40 | 28 | 23,0 | 92 | 142 | 188,0 | 65 | 52,0 | 45,0 | 55 | M 39x3 | 65 | 180,0 | 100,0 | 2000 | 4,41 |
| 45 | 32 | 27,0 | 102 | 145 | 196,0 | 70 | 58,0 | 50,8 | 60 | M 42x3 | 65 | 240,0 | 127,0 | 2500 | 5,5125 |
| 50 | 35 | 30,0 | 112 | 160 | 216,0 | 75 | 62,0 | 56,0 | 65 | M 45x3 | 68 | 290,0 | 156,0 | 3500 | 7,7175 |
| 60 | 44 | 38,0 | 135 | 175 | 242,5 | 88 | 70,0 | 66,8 | 75 | M 52x3 | 70 | 450,0 | 245,0 | 5550 | 12,23775 |
| 70 | 49 | 42,0 | 160 | 200 | 280,0 | 98 | 80,0 | 77,9 | 85 | M 56x4 | 80 | 585,0 | 315,0 | 8600 | 18,963 |
| 80 | 55 | 47,0 | 180 | 230 | 320,0 | 110 | 95,0 | 89,4 | 100 | M 64x4 | 85 | 710,0 | 400,0 | 12000 | 26,46 |
Materials:
| Housing: | up to size 10 turned, from free-cutting steel to 9SMnPb28K, |
| from size 12 forged from heat-treated steel to C45 | |
| Bearing: | steel on steel bearing GE..E, requiring lubrication, |
| from size 20 available sealed from both sides (-2RS) | |
| Lubrication: | up to size 17 regreasing not possible, |
| from size 20 fitted with hydraulic nipples to DIN 71412 |