Index
DIN
17458 PK1 Seamless
cold drawn or hot extruded, annealed and pickled or bright annealed. Testing
according to DIN 17458 PK 1 tolerances according to DIN 2462 D2/T3 or D3/T3 or
D4/T3. IC test according to DIN 50914, 100% Eddy Current tested. SEW
470 Seamless
cold drawn or hot extruded, annealed and pickled or bright annealed. Testing
according to SEW 470 tolerances according to DIN 2462 D2/T3 or D2/T3 or D4/T3. ASTM-A
269(M) Seamless
cold drawn, annealed and pickled or bright annealed Tolerances
and testing according to ASTM-A 269/A 450. IC test according to ASTM-A 262 pr. e,
100% hydrostatic of 100% Eddy Current tested. ASTM-A
312 Seamless
cold drawn or hot extruded, annealed and pickled or bright annealed. Tolerances
and testing according to ASTM-A 312/A 530, ANSI B 36.10/B36.19. IC test
according to ASTM-A 262 pr. e, 100% hydrostatic of 100% Eddy Current tested.
Stainless Steel Seamless Tubing
from Maryland Metrics
Stainless
steel seamless tubes
Please note that although we display data about ANSI/ASTM products,
we are not presently supplying ANSI/ASTM products.
|
Note: many of these products are not normally stocked in the USA, so please allow sufficient lead time for delivery. |
4301 = werknorme 1.4301 ~ AISI 304 4306 = werknorme 1.4306 ~ AISI 304L
4401 = werknorme 1.4401 ~ AISI 316 4404 = werknorme 1.4404 ~ AISI 316L
we are not presently supplying ANSI products.
Specifications are presented in a multilingual format based on our suppliers data.
Faxes: (800) 872-9329 or (410) 358-3142 & E-mail are available anytime.
Warehouse & showroom hours are Monday-Friday 10 AM to 5:30 PM.
[ To: Maryland Metrics home page ] [ To: Maryland Metrics Product Guide ] [ e-mail to Maryland Metrics ]
Please note that all Trademarks and Tradenames are the property of their respective owners.
copyright 2000, 2006, 2007 maryland metrics -- all rights reserved -- ver cc23i seamless_tubes.htm